UK Model Directory

Model list

• 20 Ton Coal
• 4 Wheel Coach
• 40 Ton Coal
• Backdrop
• Brake Van
• Butterley Signal Box
• Cattle Wagon
• Class 08
• Class 4F Engine
• Class 4F Tender
• Class 8F Engine
• Class 8F Tender
• Class N2
• Clerestory Coach
• Compartment Coach
• Concrete Fence
• Corridor Coach
• Cotton Mill
• Culvert
• Deltic
• Electric Multiple Unit
• Engine Shed
• Flats
• Footbridge
• Garage
• Gasometer
• Goods Shed
• Hall Engine
• Hall Tender
• Halt
• Jinty
• Methodist Chapel
• Office Block
• Open Wagon
• Pannier Tank
• Platform
• Prairie
• Retaining Wall
• Shelter
• Signal Cabin
• Station
• Station Signboard
• Terraced Houses #1
• Terraced Houses #2
• Terraced Houses #3
• Timber Wagon
• Toad Brake Van
• Track
• Track - 18 Degree Bend
• Track - Buffers
• Track - Crossing
• Track - Left Hand Point
• Track - Right Hand Point
• Track - Short
• Tram
• Turntable
• Vent Van
• Viaduct
• Water Tower
• Wooden Fence

No. of models: 60

20 Ton Coal

Variations:

• Full (default)
• Empty

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
05/08/24 First published.

4 Wheel Coach

Variations:

• Chocolate & Cream (default)
• Brake Chocolate & Cream
• Maroon & Cream
• Brake Maroon & Cream
• Blue & White
• Brake Blue & White

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/08/24 First published.

40 Ton Coal

Variations:

• Full (default)
• Empty

Compliance with 3D-Modellbahn Studio standards:
Complies

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
05/08/24 First published.

Backdrop

Variations:

• City 1
• City 2
• Lakes 1
• Rolling Hills 1
• Rolling Hills 2
• Rolling Hills 3
• Rolling Hills 4
• Rolling Hills 5
• Town 1
• Town 2

The backdrops will snap together when brought into proximity. They can be stretched up to a limit. To do so, click a backdrop, then click the blue arrow at one end and move that. The method is similar to stretching tracks. Only straight lengths of backdrop are possible.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK with artwork by others.

Licence:
Creative Commons 4

Brake Van

Variations:

• Brown (default)
• Light blue

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
26/09/22 Textures improved.
28/07/24 Improvements.

Butterley Signal Box

Butterley is in Derbyshire, UK. This model is available from the online catalog at:
Online catalog > Infrastructure Rail Traffic > Signal Towers

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
User kdlamann, 3D Modellbahn Studio

Licence:
3D Modellbahn Studio

Cattle Wagon

Variations:

• Brown

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
28/09/22 Textures updated.
29/01/24 Height reduced. Minor changes.
28/07/24 Improvements.

Class 08

Variations:

• Blue (default)
• Green

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
12/07/24 First published.
27/07/24 Metallic finish toned down.

Class 4F Engine

Variations:

• LMS Black (default)
• LMS Maroon

Engine only. Use with separate model: "Class 4F Tender".

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
20/07/24 Improvements.
27/07/24 Metallic finish toned down.

Class 4F Tender

Variations:

• LMS Black (default)
• LMS Maroon

Tender only. Use with separate model: "Class 4F Engine".

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
18/12/22 First published.
04/02/24 Detail added.
20/07/24 Improvements.
27/07/24 Metallic finish toned down.

Class 8F Engine

Variations:

• LMS Black (default)
• LMS Maroon
• BR Black

To be used with the Class 8F Tender model.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
28/01/24 First published.
21/07/24 Improvements.
27/07/24 Metallic finish toned down.

Class 8F Tender

Variations:

• LMS Black (default)
• LMS Maroon
• BR Black

To be used with the Class 8F model.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
28/01/24 First published.
21/07/24 Improvements.
27/07/24 Metallic finish toned down.

Class N2

3D Viewer page

Variations:

• LMS Black (default)
• GNR Green

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Smoke, animated wheels and driving position added.
12/12/22 Animated connecting rods added. Curved surfaces smoothed. Minor tweaks.
29/01/24 Minor updates.
19/07/24 Improvements.
27/07/24 Metallic finish toned down.

Clerestory Coach

Variations:

• Chocolate & Cream (default)
• Brake Chocolate & Cream
• Maroon & Cream
• Brake Maroon & Cream
• Blue & White
• Brake Blue & White

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
08/08/24 First published.
13/08/24 Blue version added. Improvements.

Compartment Coach

Variations:

• LMS 3rd - Maroon (default)
• LMS Brake 3rd - Maroon
• SR 3rd - Green
• SR Brake 3rd - Green
• GWR 3rd - Chocolate & Cream
• GWR Brake 3rd - Chocolate & Cream

Compliance with 3D-Modellbahn Studio standards:
Complies

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
23/01/24 First published.
01/02/24 Height reduced slightly.
29/07/24 Improvements.

Concrete Fence

The fence is a spline so sections can be stretched and curved.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Corridor Coach

Variations:

• BR Red & cream (default)
• GWR Chocolate & cream
• SR Green

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
29/09/22 Bogies stick to tracks around corners.
18/12/22 Rejigged, now complies with 3D Modellbahn standards.
30/01/24 Height reduced. Minor updates.
29/07/24 Improvements.

Cotton Mill

Variations:

• One storey
• Roof

To use:
1. Carefully place the ground storey on the layout in the required position.
2. Select the ground storey.
3. Control D - this will duplicate the storey in place.
4. Hover until the gizmo appears and use the Z arrow on the gizmo to lift up the copy by one storey height. It will snap into place on top of the floor below.
5. Repeat steps 3 & 4 until the building has the required number of storeys.
6. Add one more storey. For this storey, select the roof variation. It will snap into place.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Enlarged.

Culvert

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Deltic

Variations:

• None.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
19/07/24 Improvements.
27/07/24 Metallic finish toned down.

Electric Multiple Unit

Variations:

• One coach with motor.

For a two car set, the second motor should be left switched off, otherwise the two motors might conflict each other.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Driving position added. Bogies aligned to track.
14/11/22 Curved surfaces smoothed. Now complies with 3D Modellbahn Studio criteria.
18/07/24 Improvements.
27/07/24 Metallic finish toned down.

Engine Shed

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
08/10/22 Tweaks and now complies with 3D Modellbahn Studio standrads.

Flats

Variations:

• One storey
• Roof

To use:
1. Carefully place the ground storey on the layout in the required position.
2. Select the ground storey.
3. Control D - this will duplicate the storey in place.
4. Hover until the gizmo appears and use the Z arrow on the gizmo to lift up the copy by one storey height. It will snap into place on top of the floor below.
5. Repeat steps 3 & 4 until the building has the required number of storeys.
6. Add one more storey. For this storey, select the roof variation. It will snap into place.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
06/10/22 Minor tweaks.

Footbridge

3D Viewer page

Variations:

• Footbridge
• Small footbridge

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24. Parapet height reduced slightly. Small footbridge variation added.

Garage

Variations:

• Blue door
• Brown door
• Green door
• Grey door

Garages will snap together to form a row.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Gasometer

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
14/11/22 Curved surfaces smoothed.

Goods Shed

Multiple sheds will snap together to form a row.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Hall Engine

Variations:

• GWR Green
• GWR Black
• GWR Maroon
• BR Black

For use with the separate tender model.

Compliance with 3D-Modellbahn Studio standards:
Complies

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
01/02/24 First published.
26/07/24 Improvements.
27/07/24 Metallic finish toned down.

Hall Tender

Variations:

• GWR Green
• GWR Black
• GWR Maroon
• BR Black

For use with the separate locomotive model.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
01/02/24 First published.
26/07/24 Improvements.
27/07/24 Metallic finish toned down.

Halt

Small station building.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
28/08/24 Interior lights at night added and customisable sign over door added.

Jinty

3D Viewer page

Variations:

• BR Black
• CR Blue
• GWR Green
• LMS Black
• LSWR Green

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Smoke, animated wheels and driving position added.
12/12/22 Animated connecting rods added. Curved surfaces smoothed. Minor tweaks.
19/12/22 Proportions corrected.
19/01/24 Minor corrections.
29/01/24 Minor changes.
17/07/24 Improvements.
27/07/24 Metallic finish toned down.

Methodist Chapel

3D Viewer page

Variations:

• None

Compliance with 3D-Modellbahn Studio standards:
Does not comply because the LOD1 model has too many textures: it has 5, but should have 3.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Office Block

Variations:

• One storey
• Ground floor with doors
• Roof

To use:
1. Carefully place one storey on the layout in the required position.
2. Select the ground storey.
3. Control D - this will duplicate the storey in place.
4. Hover until the gizmo appears and use the Z arrow on the gizmo to lift up the copy by one storey height. It will snap into place on top of the floor below.
5. Repeat steps 3 & 4 until the building has the required number of storeys.
6. Add one more storey. For this storey, select the roof variation. It will snap into place.
7. Select the ground storey and select the ground floor variation.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/10/22 Ground floor variation added. Minor tweaks.

Open Wagon

Variations:

• Brown (default)
• Grey
• Sand

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
26/09/22 Textures improved.
29/07/24 Improvements.

Pannier Tank

3D Viewer page

Variations:

• BR Black
• CR Blue
• GWR Green
• LMS Black
• LSWR Green

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
19/01/24 First published.
30/01/24 Minor updates.
17/07/24 Improvements.
27/07/24 Metallic finish toned down.

Platform

Variations:

• Single sided platform with a fence at the back.
• Single sided platform left end.
• Single sided platform right end.
• Wider double sided island platform.
• Wider double sided island platform end. Will suit either end.
• Extra wide island platform
• Extra wide island platform end. Will suit either end.

The platforms are splines so they can be streteched and curved.

The extra wide island platform is needed for the station model.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Extra wide option added.
23/09/22 Platform surface texture added.
30/09/22 Platform textures improved.

Prairie

Variations:

• BR Black
• CR Blue
• GWR Green
• LMS Black (default)
• LSWR Green

The model is based on the 61xx class prairies. It has working connector rods.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
21/01/24 First published.
22/01/24 Minor updates and LOD 1 added.
01/02/24 Improved alignment of wheels to track on curves.
11/05/24 Minor dimensional changes.
19/07/24 Improvements.
27/07/24 Metallic finish toned down.

Retaining Wall

Variations:

• 2m high section
• 4m high section
• 6m high section
• 6m high section with parapet wall and roadway behind.
• 2m - 4m tapered section
• 4m - 2m tapered section
• 4m - 6m tapered section
• 6m - 4m tapered section

Sections snap together when brought in proximity. The arches are extendible. Curved retaining walls are possible: click the wall section, then the blue arrow, then move X in the direction of the curve. Only a small amount of X movement is needed.

Compliance with 3D-Modellbahn Studio standards:
No. Should have a reduced detail version with less textures and less polygons. Can still be used.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
13/09/22 Sections made wider. Individual tapered sections added.

Shelter

Variations:

• Single shelter, facing only one way.
• Doubled shelters, back to back, facing both ways.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
06/10/22 Shelters no longer snap together to form a longer shelter as this wasn't reliable. Two adjacent shelters can be placed by eye or by using their co-ordinates in the properties area.

Signal Cabin

Variations:

• None.

3DTS up to v7 - Works as a static model but the front and back signs are blank.

3DTS v8 onwards - The default texts on the signboards is "STATION" but this text can be changed. Place and select the object, then click the Properties icon on the toolbar. The texts cannot be set independently.

If required, a signal man from the online catalogue can be added as a separate object.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 First published.

Station

3D Viewer page

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
20/10/22 Complies with 3D Modellbahn Studio standards.

Station Signboard

Variations:

• None.

3DTS up to v7 - Works as a static model but the sign is blank.

3DTS v8 onwards - The front and back default texts are "STATION" but these texts can be set independently. Place and select the object, then click the Properties icon on the toolbar. For a single sided sign, just set the back text to blank.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 First published.

Terraced Houses #1

Variations:

• Grey Brown
• Dark
• Beige
• Red Brick
• For Sale

This model is available from the online catalog at:
Online Catalog > Infrastructure > Urban and countryside > Row houses

Attribution:
User kdlamann, 3D Modellbahn Studio

Licence:
3D Modellbahn Studio

Terraced Houses #2

Terraced houses based on some on Mill Road, Cambridge.

This model is available from the online catalog at:
Online Catalog > Infrastructure > Urban and countryside > Row houses

Attribution:
User kdlamann, 3D Modellbahn Studio

Licence:
3D Modellbahn Studio

Terraced Houses #3

Two pairs of terraced houses with central rear access passage.

Models will click together to form a row.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
23/10/22 Houses and passage combined into one model. Multiple models can click together to form rows.

Timber Wagon

Variations:

• With timber (default)
• Empty

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
29/07/24 Improvements.

Toad Brake Van

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
29/07/24 First published.

Track

Variations:

• None.

This track is a spline so it can be stretched and curved.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 Updated.

Track - 18 Degree Bend

Variations:

• None.

The curve has a radius of 550mm at 1:87 scale and an arc of 18 degrees which matches the points. Using a point with this piece will split one track into two which are the correct distance apart.

This track is a spline so it can be further stretched and curved.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 Updated.

Track - Buffers

Variations:

• None.

Replaces the previous buffers object offered by 3d-train-studio.uk which did not comply with 3d-modellbahn-studio standards. This buffers object is quite short. It is a rigid spline and cannot be curved.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 First published.

Track - Crossing

Variations:

• None.

The crossing is symetrical and can serve as a left hand or right hand crossing.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
08/06/24 First published.

Track - Left Hand Point

Variations:

• None.

Unlike most points in the online catalog, this point has a frog, check rails and the point blades are animated. The blades will switch automatically to match the route set for the point.

The curved route has a radius of 550mm at 1:87 scale and an arc of 18 degrees.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 Updated.

Track - Right Hand Point

3D Viewer page

Variations:

• None.

Unlike most points in the online catalog, this point has a frog, check rails and the point blades are animated. The blades will switch automatically to match the route set for the point.

The curved route has a radius of 550mm at 1:87 scale and an arc of 18 degrees.

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 Updated.

Track - Short

Variations:

• None

Although its possible to use a standard track and make it shorter, the sleepers can become too squashed. The sort track is useful for this application. The short track is a rigid spline and cannot be curved.

Compliance with 3D-Modellbahn Studio standards:
Complies

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
07/06/24 First published.

Tram

3D Viewer page

The model is similar to the last Sheffield tram which is on display at the Crich Tramway Village.

The door should be at the back and the collector should be trailing backwards relative to the direction of travel. UK vehicles drive on the left and the door should be on the nearside.

The previous flip animation didn't work very well enough so its been removed. To flip the tram direction, set up a track contact with the following event Lua code:

vehicle.targetSpeed = 0
vehicle.transformation:rotateZ(math.pi)
vehicle.targetSpeed = 20

The tram is intended for use on HAMO track which can be found at
Online Catalog > Thoroughfares > Track > Scale HO 1:87 > HAMO > Spur HO Streetcar

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
19/07/24 Improvements.

Turntable

Variations:

• None.

See the Turntable post for animation guidance.

Compliance with 3D-Modellbahn Studio standards:
Complies

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
30/05/24 First published.

Vent Van

Variations:

• Brown (default)
• Blue
• Green
• Off-White

Compliance with 3D-Modellbahn Studio standards:
Complies.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
25/09/22 Textures improved.
30/07/24 Improvements.

Viaduct

Variations:

• Brick viaduct, open underneath.
• Brick viaduct, storage unit underneath.
• Steel girder bridge.

The viaduct and the bridge will snap together at the right height.

They come as splines, so they can be stretched and curved. Model girder bridge sections will curve but real ones are always straight.

The viaduct is wide enough for one track, required and placed separately, or a narrow road.

Compliance with 3D-Modellbahn Studio standards:
No. Too many materials and too many polygons. Can still be used.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Changelog:
02/09/22 Arch width increased.

Water Tower

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4

Wooden Fence

The fence is a spline so sections can be stretched and curved.

Attribution:
3D Model Studio UK

Licence:
Creative Commons 4